1. Small size, easy installation, space saving and long service life. It can be installed indoors and outdoors without building a house, saving soil and construction costs.
2. The filtering water is large, the filtering effect is good, and the filtering flow rate is fast; the filter is backwashed with filtered clean water, and there is no need to set up a booster pump and a backwash pump; High filtration accuracy, high impurity filtration accuracy.
3. Automatic backwashing: The backwashing of the equipment is automatically identified and controlled by the intelligent control system without manual intervention. Even if the suspended solids in the water fluctuate, the equipment can be adjusted automatically.
4. The water supply is uninterrupted; when the equipment is backwashed, the filtering process will be carried out at the same time, and the system will supply water as usual.
5. Adopting unique cloth and water collecting device, due to the unique water distribution system and very evenly distributed water collecting device of the filter system, the water flow is laminar flow throughout the filtering process, and the filter sand bed plane is always flat during the filtering process. The effluent quality is stable.
6. Using refined and preferred quartz sand or garnet as the filter medium, the smallest particle size of the filter can be a homogeneous filter material of 0.16mm
7. Long-term operation cost is low, saving electricity, water, and maintenance costs.
(1) Power saving: The system has a unique automatic backwashing valve. The backwashing of the sand filter tank is not carried out at the same time, but it is backwashed one by one under the normal operation of the system. There is no need to consider setting up a backwashing pump. At the same time, compared with other sand filter equipment, the required filter water pump lift is lower.
(2) Water saving: Due to its unique water supplement and water collector, the system has a unified tank body, so that the medium layer can be expanded evenly for effective backwashing without compressed air during backwashing. The water used for backwashing is filtered clean water, so the amount of backwashing water consumed is small.
(3) Save maintenance costs: The entire system has no mechanical or electric valves, and only relies on a unique multi-function valve to control the backwash of the system. Due to the unique multifunctional valve, there is no wear and long life.