1. The surface should be cleaned with corrosion. The surface stains of the bathtub can be wiped lightly with turpentine, alcohol, toothpaste, etc., and can not be cleaned with corrosive cleaning agents. It is also forbidden to use chemicals such as strong alkalis and thinner in the tank.
2. Do not use hot water. It is best not to use hot water above 80 degrees in the bathtub. Frequent use will shorten the service life of the cylinder. If you want to use hot water, you must put cold water first and then hot water.
3. Avoid debris. When the bathtub is in massage work, be careful not to block the backwater network with debris. Blockage of the water network will cause the pump to be overloaded and burn the pump. Therefore, the backwater network should be cleaned frequently to avoid unnecessary trouble.
4. Do not open it without water. If there is no water in the bathtub, the water pump cannot be started. Starting the water pump in the case of bathtub sewage will make it easy to burn out. There is a rubber sealing ring in the water pump, which can easily be damaged when it is idling.