How To Maintain The Jacuzzi?

1. If there are scratches on the surface of the bathtub, just polish it with 2000# water scrubbing paper, then apply toothpaste, and polish it with a soft cloth to make it as smooth as new.

2. The scale on the surface of the bathtub can be wiped with a soft cloth after adding a mildly acidic detergent, such as lemon juice and vinegar.

3. The hydraulic friction device cleans 40 degrees Celsius hot water and fills up the bathtub. Add detergent for every liter of 2 grams. Start the hydromassage for about 5 minutes, stop the pump for draining, then fill up with cold water, start the hydromassage for about 3 minutes, stop the pump for draining And clean the bathtub.

4. The surface of the cylinder body is dirty and can be wiped with a wet towel. This process can be repeated three times, and it will be as clean as new.

5. Do not use rough surfaces, utensils, chemical solvents or particles to clean the surface of the cylinder.

6. Do not use hard objects or blades to hit and scratch the surface of the bathtub, and at the same time, do not allow cigarette butts or heat sources higher than 70 shots to touch the surface of the bathtub.

7. After using the bathtub, drain the water and disconnect the power supply.

8. If the water return device and nozzle are blocked by hair and other sundries, they can be unscrewed and cleaned.

9. Gold-plated and chrome-plated parts do not need to be wiped frequently.