+86-513-88773711

What Should Be Paid Attention To When Using The Independent Outdoor Bathtub Infrequently?

Sep 05, 2022

Nantong Jiajing Health Technology Co., Ltd. specializes in the production of intelligent bathtubs, outdoor bathtubs, spa bathtubs and other bathtubs. It is a professional manufacturer of independent outdoor bathtubs and will provide you with a full set of solutions.


Every season (not used in winter) or when the independent outdoor bathtub is not often used, a large amount of blocked scale may affect its service life, so maintenance is particularly important.


At this time, it is necessary to use a filter to filter harmful dirt, scale, algae, etc. in tap water, and also to remove metals, copper, iron and manganese dissolved in water. The hot outdoor bathtub must be filled with water through the filter compartment every time it is used. In order to maintain the water quality of portable outdoor bathtubs, large outdoor bathtubs can be regularly maintained by adding chemicals, including YOULUJING disinfectant powder, MPs, powdered pH enhancer and inhibitor, powdered total alkalinity enhancer, descaling solution and defoaming solution, which must be directly added to the filter compartment when the massage pump is running at high speed, and the cover plate must be removed to let the massage pump run for more than 10 minutes. To ensure that the chemicals are fully mixed when added. Perform perchlorization / chlorine free oxidation treatment you may choose to perform perchlorization (add 1.5 tsp of chlordecone per 950 liters of water) or oxidation (add 4 tsp of monosulfate per 950 liters of water) treatment once a week or every month. Increasing the chlorine concentration to 5pm after 24-48 hours can remove excessive waste and chloramine from the pool water. For outdoor Jacuzzi with more times of use, it is better to use YOULUJING with chlorine concentration six times higher than MPs. After the independent outdoor bathtub is chlorinated or oxidized, the thermal insulation cover shall be opened and all nozzles shall be started for at least 20 minutes to exhaust the oxidizing gas and prevent the thermal insulation cover and pillow pad from being damaged and discolored. Such damage is considered as misuse of chemicals and is not covered by the limited warranty.


Send Inquiry